Part Number Hot Search : 
H8S2160B MCP1802 1N961 MC13192 KDR105 USM16SPT YD5530 AH180
Product Description
Full Text Search
 

To Download MM1332 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MITSUMI
Control of Lithium Ion Batteries Charging MM1332
Control of Lithium Ion Batteries Charging
Monolithic IC MM1332
Outline
This IC is a high precision constant voltage constant current power source controller for lithium ion batteries serving as power drivers for P-MOS FET. It was developed for use with one to three cell chargers, and the constant current value can be set freely with external resistance. It has a built-in amplifier for detecting low battery voltage. Using this IC enables the easy addition of a lithium ion battery charging function to conventional battery-charging devices.
Features
1. Output voltage (Ta=-20C+~70C) 3Cell : 12.3V/12.6V150mV 2Cell : 8.2V/8.4V100mV 1Cell : 4.1V/4.2V50mV 250A typ. set by external resistance 0.1V=external resistance current value 2.0V/cell
2. Current consumption 3. Constant current output Current limit (reference voltage) 4. Low voltage detection function (LV)
Package
SOP-8C, SOP-8E (MM1332 F) The box represents the output (charging) voltage rank.
*
Applications
1. For charging lithium ion batteries 2. High-precision Stable power sources for all types of equipment
Absolute Maximum Ratings
Item Storage temperature Operating temperature Power supply voltage Output voltage SW input voltage
(Ta=25C) Symbol TSTG TOPR VCC max. VO max. VSW Pd Rating -40~+125 -20~+70 -0.3~+18 -0.3~VCC -0.3~VCC+0.3 300 Units C C V V V mW
Allowable power dissipation
MITSUMI
Control of Lithium Ion Batteries Charging MM1332
Electrical Characteristics
Item Operating power supply voltage range Current consumption 1 Current consumption 2 Output voltage Current limits CEL-CS resistance SW1 input current
(Unless otherwise specified Ta=25C, VCC=5V/CEL) Measurement Conditions Min 5.0 VSW1=VSW2=OV (Charge : ON) VSW1=VSW2=VCC (Charge : OFF) Ta=-20~+70C, MM1332A, B, C Ta=-20~+70C, MM1332D, E, F MM1332A, B, C MM1332D, E, F Charge : ON Charge : OFF A~F Rank G Rank Low-voltage detection circuit : ON Low-voltage detection circuit : OFF -0.3 VCC -1.0 1.90 2.00 -0.3 VCC -1.0 2.00 2.15 20 2.0 VCC +0.3 0.2 ISINK=1mA 0.2 0.4 V A V 4.05 4.15 90 250 2 4.10 4.20 100 820 840 20 2.0 VCC +0.3 2.10 2.30 V V/sell A V k/sell A V 4.15 4.25 110 V/sell mV Typ. Max. Units 17.0 V A A
Symbol VCC ICC1 ICC2 VO VCL RCEL ISW1 VL1
SW1 input voltage
VH1 LV ISW2 VL2
Low-voltage detection voltage SW2 input current
SW2 input voltage VH2 Low voltage detection output leak current Low voltage detection output saturation voltage ILV VLV
* : MM1332
A : Output voltage 4.1V -for 1cell B : Output voltage 8.2V -for 2cell C : Output voltage 12.3V -for 3cell D : Output voltage 4.2V -for 1cell E : Output voltage 4.4V -for 2cell F : Output voltage 12.6V-for 3cell G : Output voltage available
MITSUMI
Control of Lithium Ion Batteries Charging MM1332
Pin Assignment Description
8 7 6 5
1
2
3
4
SOP-8C/SOP-8E Pin No. Name SW1 I/O Input SW1=VCC : OFF, SW1=GND : ON Goes OFF when open as it is pulled up to VCC. Low voltage detection circuit ON/OFF control input pin. 2 SW2 Input SW2=VCC : OFF, SW2=GND : ON Goes OFF when open as it is pulled up to VCC. 3 LV GND CS Input Output Low voltage detection circuit output pin. NPN-Tr open collector output; goes ON (low level) for low voltage. Ground pin. Current detection pin. Detects current when external resistor voltage drops and controls current. Reference voltage 0.1V=external resistance Battery voltage input pin 6 CEL Input current value Description Charging ON/OFF control input pin. 1
4
5
*
Six types depending on rank : 4.1V, 8.2V, 12.3V, 4.2V, 8.4V, 12.6V, (TYP.) Constant voltage circuit output pin. Controls external P-MOS FET gate and charges constant voltage. Power supply input pin.
7 8
EXT VCC
Output
Constant voltage circuit pin *G : External resistance ratio input R2) enables setting constant voltage circuit output voltage. (R1 : Low voltage detection voltage is set for one cell (4.1V or 4.2V).
MITSUMI
Control of Lithium Ion Batteries Charging MM1332
Block Diagram
MM1332A, B, C, D, E, F,
MM1332G


▲Up To Search▲   

 
Price & Availability of MM1332

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X